FRP (FIRE RETARDANT PROOF) RODUCTS
Typical Properties of Glass Expoxy Laminates |
|||
G-11 |
G-10 |
Unit |
Charactertics |
Light Green |
Light Green / Yellow |
|
Colour |
H |
F/J |
|
Thermal Class |
۱٫۸ |
۱٫۸ – ۱٫۸۲ |
Gm/cm3 |
Specific Gravity |
۳۷,۰۰۰ |
۳۸,۰۰۰ |
Psi |
Tensile Strength |
۶۳,۰۰۰ |
۶۵,۰۰۰ |
Psi |
Comp. Strength |
۷۰,۰۰۰ |
۶۰,۰۰۰ |
Psi |
Flexural Strength |
Mll2 |
M115 |
M Scale |
Hardness |
۲۲۰۰ |
۲۳۰۰ |
Psi |
Bond Strength |
۲۲۰۰۰ |
۲۱,۵۰۰ |
Psi |
Shear Strength |
۰٫۰۳۲ |
۰٫۰۳۲ |
۱۰۶cycles |
Dissipation Factor |
۴٫۵ |
۴٫۸ |
۱۰۶cycles |
Dielectric Constant |
۴۵ |
۴۰ |
KV /MM |
Electrical Strength |
۱۲۰ |
۱۰۰ |
Sec |
Arc Resistance |
۹۴H-B |
۹۴V-0 |
|
Flammability Rating |
۱۸۰ |
۱۴۰ |
°C |
Max Oper. Temp. |
۰٫۲ |
۰٫۱ |
IN/IN/°C X 10-5 |
Coeff Thermal Exp. |
۰٫۲ |
۰٫۱ |
% – ۲۴ hrs |
Water Absorption |
>24 months |
>24 months |
۲۵ °C |
Shelf Life |
FRP (FIRE RETARDANT PROOF) RODUCTS
Fartak can provide Fiberglass products (Epoxy and Polyester) in various sizes and shapes of Sheet, Flats (coil Support/Bar), Rods, Tubes, Spacer, Angles & sections. These sections being made from epoxy resin and glass fibers combined together give an excel lent performance that combine high strength and excellent electrical insulating characteristics for use in a variety of applications where electrical insulation and non- corrosive material is required in the electrical and thermal insulation industry. The company believes in ‘providing satisfactory solutions and assistance’ to the clients. With zeal to achieve consistent growth, the company strives on customer satisfaction as its main motto. A variety of custom built sections can also be made upon demand of the customer.
GRADES
G-10 and G-11 (Glass Cloth / Epoxy Resin)
This glass epoxy laminates are specified for their extremely high stability over temperature, G-10 and G-11 are used for terminal Board, insulation in electro magnet separators, High humidity applications, LV and HV circuit breakers, Electric Rotor Insulations, and where strength to size ratio is critical, G-10 is stronger while G-11 is a better insulator and can take higher temperature.
FR-4 (Glass Cloth / Epoxy Resin)
FR-4 is Fire Retardant G-10 Glass Epoxy laminates